Data plane

Protocol normalization

A core feature of Drogue Cloud is the abstraction of protocols. Typical IoT protocols are MQTT, CoAP, OPC UA, but also HTTP is being used by some devices.

Ideally, your cloud side application only needs to think about implementing one protocol, in order to interact with your devices. However, different IoT protocols provide benefits on the device side. As the devices are more constrained than the cloud side, Drogue Cloud tries to levarage the benefits of IoT protocols, while providing a normalization layer on the cloud side, that makes it easy for your applications to consume the data.

But also on the cloud side, different ways to consume data exists. May that be a direct connection to a Kafka topic, again MQTT, or a simple Web socket connection. Drogue Cloud tries to be integrate as good as possible, and not force you into a specific API.

Drogue Cloud is based on Knative, and internally uses the Cloud Events specification to forward messages. Cloud events on the other side have different mappings to transport channels, such as MQTT, Kafka, HTTP, etc.. And while Cloud Events can also be used on the external interfaces of Drogue Cloud, it isn’t a requirement, and you can use your custom protocols as you need.

Data plane overview

Devices communicate with the Protocol endpoints, which implement the protocol specific mapping between the actual protocol and the internal Cloud Events based message format.

The protocol endpoints also authentication and authorize devices and its configured gateways. Validate credentials, or X.509 client certificates and ensure that the devices are enabled in the system.

Once the device is granted access to publish (or receive) data, the protocol endpoint will hook up the device to the internal message flow. It subscribes to commands targeted towards the device, and forwards messages from the device to an internal Knative eventing endpoint which takes care of processing and delivering the messgaes.

The actual payload of the messages is not processed, and just passed on the Knative eventing destination.

In some cases the payload of an incoming request is not equal to the payload of the actual message.

For example, a request from "The Things Network" (TTN) conists of a payload, which contains meta data (like the device ID), and then the actual payload of the original message from the device.

In cases like this it depends on the protocol adapter what it considers payload and what is metadata. In the case of TTN, you can configure if you want to have the full request payload, or just the original device payload.

Message persistence

When a protocol endpoint drops off an incoming message to the Knative eventing service, this service is backed by a Kafka topic[1].

The responsibility of Kafka is to deliver messages to the target consumer. Peristing messages if needed, and handling shared consumer groups if requested. This allows Drogue Cloud to buffer messages when the consumer is unavailable or of there is a peak of messages that the consumer currently cannot handle. Also, this allows to drive a shared consumer model, where in a group of consumers only one receives a messages. This concept is used to share the load for messages to multiple instances of a consumer.

As mentioned before, Drogue Cloud relies on a Knative eventing destination which provides these guarantees, and uses Kafka to implement this. However, it is possible to replace the Kafka implementation with a different implementation.

Consuming messages

Applications, like devices, are provided by the user and live outside of the Drogue Cloud instance. They still may run on the same cluster. By "consuming" messages, we mean that messages, sent by a device, are forwarded to the target application. It also implies a channel back to the device, for sending commands. However, as device-to-cloud messages are much more frequent, we simply focus on "consuming" messages.

In general there are "push" or "pull" modes. Messages are always sent to the consumer in an event oriented manner, "push" and "pull" only refers on who initiates the process.

Push model

A sender service inside the Drogue Cloud instance constantly tries to reach out to a target destination, trying to deliver messages.

This might be a Knative eventing service, which tries to deliver messages from the Kafka topic to an HTTP endpoint.

Pull mode

A passive service inside the Drogue Cloud instance that waits for a consumer to connect. Once the consumer connected successfully, messages start to flow.

This might be an MQTT server, which publishes messages to the consumer once it subscribed.

Authentication & authorization

Authentication (authn) and authorization (authz) happens in two different realms[2] of the system. On the device facing side and on the user/application facing side. And while it may be technically incorrect, in the next few paragraphs "authentication" implies authentication and authorization, unless noted otherwise.

The device facing authentication is backed by the device registry, which is the central storage for device information and configuration. It also stores credentials of devices, like passwords or X.509 trust anchors.

The user facing authentication is backed by an Open ID connect, single sign-on system. By default we use Keycloak, however it should be possible to use any other Open ID connect compatible solution.

Services internally also use the same SSO solution as external users.


1. Technically it is a Knative eventing service, which could be implemented by different technologies. The default implementation for Drogue Cloud though is Kafka.
2. The term "realm" doesn’t refer to an HTTP or Keycloak "realm" here